berikut tutorial setting dasar mikrotik
interfacepertama yang perlu dilakuanadalah ngubah nama dari interface
setelah itu lakukan set ip
ip address
selanjut nya setting
selanjut nya setting routing gateway nya
ip routers
setting DNS
ip dns
selanjut nya setting dhcp agar memudahkan dalam setting ip di client-client
selanjut nya agar client client dapat berinternet ip local nya di terjemah kan ke ip public
ip firewall nat
selesai sudah setting dasar mikrotik
nb:
===========script==================
/ interface ethernet
set modem name="modem" mtu=1500 arp=enabled \
disable-running-check=yes auto-negotiation=yes full-duplex=yes \
cable-settings=default speed=100Mbps comment="" disabled=no
set local name="local" mtu=1500 arp=enabled \
disable-running-check=yes auto-negotiation=yes full-duplex=yes \
cable-settings=default speed=100Mbps comment="" disabled=no
/ ip address
add address=192.168.1.254/24 network=192.168.1.0 \
broadcast=192.168.1.255 interface=modem comment="" \
disabled=no
add address=172.16.26.1/24 network=172.16.26.0 \
broadcast=172.16.26.255 interface=local comment="" \
disabled=no
/ ip route
add dst-address=0.0.0.0/0 gateway=192.168.1.1 scope=255 \
target-scope=10 comment="" disabled=no
/ ip dns
set primary-dns=202.134.1.10 secondary-dns=203.130.209.242 \
allow-remote-requests=yes cache-size=2048KiB \
cache-max-ttl=1w
/ ip dhcp-server
add name="dhcp1" interface=local lease-time=3d \
address-pool=dhcp_pool1 bootp-support=static \
authoritative=after-2sec-delay disabled=no
/ ip dhcp-server network
add address=172.16.26.0/24 gateway=172.16.26.1 \
dns-server=202.134.1.10,203.130.209.242 comment=""
/ ip firewall nat
add chain=srcnat out-interface=modem action=masquerade \
comment="allow connection from local" disabled=no
